AT: Tenergy 7.4V 1150mAh LIPO PCB Protected Battery Pack w/ Bare Leads

7.4V 1150mAh Polymer Li-IonPolymer battery packNominal Voltage7.4V Capacity1150mAhMax. Discharging rate:7Amp with PCBOne protective circuit board PCB installed with thebattery packthat limits the discharging current of battery pack to 3Amp. But protect battery from- Over-chargingcut-off8.4V- Over-dischargingcut-off4.6V- Over-drain >6.5Amp – Short circuit and Wrong polarityLight-weighted1.6 oz. Dimension66mm x 34mm x 10mm5″ (127mm) long prewired and shrink wrapped, 26AWG Wires Recommended charger:Universal Li-ion / Li-polymer Smart Charger to charge this battery pack. If you connect two of these modules in parallel, you can build a 7.4V1.75 Ah Battery packwith a 1.7 Amp discharge rate. Applications- HID Bikelight or Dive light – Autonomous submarine – RC Car and RC airplane with greater energy needs – Building external battery packs for Laptop computers or 12V portable devicesCautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are NOT responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.

Want more deals from

Then visit Savintle for millions of coupons and deals.

Navigation

Categories

AT: Tenergy 7.4V 1150mAh LIPO PCB Protected Battery Pack w/ Bare Leads

Share

Similar Offers

41298335 HP Inc. Mobile Wor...

Save $200 and get a $400 De...

Follow Us