Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12VPatent pending watchdog technology provides maximum safetyUniversal for any NiMH /NiCd battery packs 6V – 12V (5-10 Cells Pack)Accessories Included1 standard Tamiya connector with Temperature Sensor. 1 adapter from standard Tamiya to Mini Tamiya. 1 adapter from standard Tamiya to a pair of alligator clip. Smart Charger SpecificationFOR 6V-12V NiMH/NiCD Battery Packs 5-10 Cells PacksInputAC 100-240V Output6-12V, 1A or 2AOperation InstructionConnect battery pack to output connector and plug AC power sourceMake sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on Battery will be charged at 1A or 2A constant current (selectable)Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh batteryThe charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun Don’t charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh Battery pack must be made by high drain current cell Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse. CautionThe charger is designed for indoor use only. Don’t leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. Don’t cover the charger when charging, ambient temperature shall not be more than 40oCDon’t touch the plug. Don’t leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries. Don’t try to disassemble the charger; High voltage inside!Download product data sheet here.
|