ZipWall’s dust barrier system is a quick easy way to set up a temporary wall or small room to isolate dust and dirt so it doesn’t get into the larger room you’re working in. However if you’re painting or working with other chemicals the dust barrier system may not be enough to prevent fumes or toxins from escaping the barrier. In these situations the FoamRail Span adjustable tapeless seal can be used along with the dust barrier to create a tight seal where the plastic cloth meets the ceiling or floor. The FoamRail Span can be installed in seconds and expands from 4’3” to 8’ in length. When used with the ZipWall SideClamp it can also create a seal along a wall.Easy to Set Up and Take DownDepending on what work you’re doing it may be necessary to create a tight seal where the plastic sheeting you’re using meets the floor or ceiling. This can be accomplished with tape but that could damage the surface it’s attached to. A better solution is to use ZipWall’s FoamRail Tapeless Seals to create the seal. The FoamRail is designed specifically for the ZipWall dust barrier system and can be installed and removed in seconds. Once your dust barrier is set up expand the FaomRail to the desired length snap it to two ZipWall poles and the FoamRail will push the plastic sheeting against the floor or ceiling creating a tight seal. When used with the ZipWall SideClamp the FoamRail can also create seals on walls as well.Won’t Damage Ceiling Floors or WallsBecause the FoamRail uses a soft foam edge to create a seal there’s no danger of damaging exposed surfaces. Regular tape can leave sticky residue that’s hard to clean or even pull layers of paint and wallpaper off whatever surface it’s attached too. Save yourself valuable repair time by using the FoamRail which is designed to keep the seal in place using only tension.
|